4.8 / 419 reviews

Made to Measure Wall Murals

Easy to Wallpaper

FREE Shipping*

+44 1772 284 110

Have your favourite view everyday!Enjoy holiday memories on your wallBusiness artwork to brighten up your office!

Install Your Mural

  • 100% Guarantee
  • Choice of wall mural materials
  • Superior, made to measure & high quality
  • Delivered FREE direct to you

We recommend that two people hang the wall mural together to help achieve the best results.

It is important that you follow the full installation guide that will be supplied with your wall mural.

How to prepare your wall

To ensure that your mural has a long and healthy life, it's important to prepare it's new home. Below is a quick guide to preparing your wall for your new mural.

Plaster
Ensure that your plastered wall is clean and dry with no loose plaster or contaminants. Finish with a good quality seal/primer.

Painted walls
If your wall is painted, we recommend that the mural is installed on matt emulsion paint only. Old, flaking paint will need to be scraped and sanded to a smooth surface. Finish with a good quality wall sealer/ primer. For freshly painted walls, allow 2 to 3 weeks drying time before installing your mural.

Wallpapered walls
Remove any old wallpaper before installation and do not use lining paper underneath your wall mural. Seal/prime before installation.

Self-Adhesive Murals
We recommend that these murals are installed on smooth wall surfaces that are painted white but if the image is very dark, a dark paint may give a better finish. This material has a small amount of transparency, so paint colours other than white may show through slightly, depending on the colours contained within your mural print itself.

HANGING INSTRUCTIONS PASTE THE WALL

Tools you'll need

Wallpaper PasteWallpaper RollerTape MeasureSpirit LevelPencilBrushSharp KnifeClean Cloth
Panels

Step 1

Your wall mural will be supplied in panels. Lay the panels out in order and leave to rest for at least 5 hours. Make sure that you check over your mural carefully when you open it. Before application, sponge/ spray your prepared wall with water. It is recommended that you work left from right.

Panels

Step 2

Create a guideline using a spirit level and tape measure by drawing a straight line horizontally, a panel's width in from the edge of the wall. Remember to deduct the measurement of the bleed/extra bit of paper. This will help you guide your panel into place to ensure it's applied straight.

Panels

Step 3

Use a medium pile paint roller to apply the supplied paste to the wall, in the area the first panel will be installed. Apply the first panel to the pasted area and try not to squeeze any paste out of the edges. Make sure that you leave any extra bleed at the top, bottom and side for trimming later. Smooth a damp sponge or brush to gently smooth out any wrinkles or bubbles from the top of the panel to the bottom.

Panels

Step 4

Paste the wall before each panel. Apply the second and subsequent panels. Ensure that the pattern or image matches up as each panel is applied. Slide each panel into place, making sure they are edge to edge - without overlapping and without leaving any gaps. Smooth each panel with a damp sponge or brush after each application.

Panels

Step 5

When all panels have been installed, carefully trim the top, bottom and far left and right sides of your mural with a sharp blade. Use a damp sponge/brush to remove any excess paste.

It is important that you follow the full installation guide that will be supplied with your wall mural. Download the full installation guide for Paste the Wall material here.

HANGING INSTRUCTIONS PEEL & STICK

Tools you'll need

Tape MeasureSpirit LevelPencilSharp Knife
Panels

Step 1

Your wall mural will be supplied in panels. Lay the panels out in order and leave to rest for at least 5 hours. Make sure that you check over your mural carefully when you open it. It is recommended that you work left from right.

Create Guideline

Step 2

Create a guideline using a spirit level and tape measure by drawing a straight line horizontally, a panel's width in from the edge of the wall. Remember to deduct the measurement of the bleed/extra bit of paper. This will help you guide your panel into place to ensure it's applied straight.

First Panel

Step 3

Take your first panel and carefully peel a small amount of the top of the mural from the backing paper. Apply the top of the panel to the wall, ensuring that the right hand edge aligns with your vertical line. Carefully peel away the rest of the mural from the backing paper and gently apply it to the wall working down towards the bottom of the panel. If you need to re-position any part of the panel, simply peel the appropriate amount away from the wall and re-apply. Gently smooth out the mural as you go.

Remaining Panels

Step 4

Apply the second and subsequent panels, making sure that that the panels are laid are edge to edge - without overlapping and without leaving any gaps. Ensure that the pattern or image matches up as you apply each panel.

Trim Panels

Step 5

When all panels have been installed, carefully trim the top, bottom and far left and right sides of your mural with a sharp blade.

It is important that you follow the full installation guide that will be supplied with your wall mural. Download the full installation guide for Textured Peel & Stick material here..

Select Your Currency

Australia (AUD) Canada (CAD) Denmark (DKK) Europe (EUR) Finland (EUR) Germany (EUR) New Zealand (NZD) Norway (NOK) Sweden (SEK) UK & Worldwide (GBP) United States (USD)